Fevikwik 102 20 gram (Pack of 60)

FEVIKWIK 102 is a low-viscosity, fast-setting cyanoacrylate adhesive used for bonding. formulation for extra-fast setting time and good bond strength. PRODUCT FEATURES :  Colourless  Fast setting  Ease of application  easy to remove tile chips after use APPLICATION AREA: FEVIKWIK 102 is suitable for bonding plastics, metal, and rubber components. It has typical applications in Tile and stone fixing, Flex Banner Pasting, PVC Doors, coir mats, photo frames, etc.METHOD OF APPLICATION :For best results, please ensure that the surface is dry & free from moisture, dust, dirt, rust, grease & oil, etc. The surface should be decreased and abraded by using suitable emery paper. Apply FEVIKWIK 102 on the surface of one adherent in a thin film or drop and spread uniformly. Quickly bond the surface of other adherents and hold firmly for a few seconds until the parts achieve sufficient handling strength.After work is over immediately close the bottle. TYPICAL PROPERTIES: Appearance : Clear transparent liquid Viscosity at 25oC : Approx. 1 - 5 Centi Poise Gap Fill : 0.05 mm approx. Flash Point : > 85 oC Specific Gravity : 1.06 approx. Operating Temp : - 40 oC to +80 oC Cure Speed : Metal-Metal* : < 10 Seconds Plastic-Plastic** : < 5 Seconds Rubber-Rubber*** : < 5 Seconds Shear Strength, M.S.-M.S. : > 80 Kg/sq.cm. Full Cure Schedule : 24 Hours at ambient. * Mild Steel, Aluminum, Brass, etc. ** Various Plastics viz. PVC, ABS, Polypropylene, Polystyrene, Polycarbonate, Perspex etc. Primer PP-2 improves performance on polypropylene. It does not bond polyethylene and Teflon.