WAXPOL HYDRAULIC BRAKE FLUID DOT 3 500 ML (PACK OF 24)

Waxpol Hydraulic Brake Fluid DOT 3 is a type of brake fluid designed for use in hydraulic brake systems in vehicles. DOT 3 is a standard established by the U.S. Department of Transportation (DOT) that sets specific requirements for brake fluid performance. Here are some key features and information about Waxpol Hydraulic Brake Fluid DOT 3: Brake Fluid Type: DOT 3 brake fluid is a glycol-based hydraulic fluid commonly used in automotive brake systems. Compatibility: It is designed for use in vehicles that require DOT 3 brake fluid. It is essential to use the correct type of brake fluid specified by your vehicle manufacturer. Boiling Point: DOT 3 brake fluid typically has a dry boiling point (uncontaminated by moisture) of around 401°F (205°C) and a wet boiling point (contaminated by moisture) of approximately 284°F (140°C). This means it has good resistance to heat, which is important in brake systems where temperatures can rise during heavy braking. Moisture Absorption: Brake fluids are hygroscopic, meaning they absorb moisture from the air over time. This can lead to a decrease in their boiling points, potentially affecting braking performance. Regular maintenance, such as brake fluid replacement, helps mitigate this. Safety: It's essential to handle brake fluid with care, as it can be corrosive and harmful to your skin and eyes. It should be stored in a tightly sealed container away from direct sunlight and moisture. Compatibility: Check your vehicle's owner's manual or consult a qualified mechanic to ensure that Waxpol Hydraulic Brake Fluid DOT 3 is compatible with your vehicle's brake system. Brake System Maintenance: Brake fluid is a critical component of your vehicle's braking system. It should be checked regularly for contamination and replaced as recommended by your vehicle manufacturer.